BOLA PFA Flat Flange Reactor Vessels – what you should know about.
Perfectly suited for the distillation of strong alkaline or acid products as well as very aggressive solvents when the resistance of other materials, such as glass, is not sufficient. All parts exposed to the medium are either made completely of PTFE/PFA or are coated with PTFE, such as the thermometers. The distillate in the Liebig Condenser is conducted to the collection vessel through a PFA pipe.
For heating we recommend either a thermostat or an electric heating mantle. However, a temperature of +200°C should not be exceeded.
The PFA reaction vessel with flat bottom is an alternative to the PTFE reaction vessel with round bottom. It is translucent, non-porous and can be used for mixing the material with a hotplate magnetic stirrer and a PTFE coated magnetic stirring bar
The Special Clou – the Safe-Lab Principle
For heating we recommend either a thermostat or an electric heating mantle. However, a temperature of +200°C should not be exceeded.
The PFA reaction vessel with flat bottom is an alternative to the PTFE reaction vessel with round bottom. It is translucent, non-porous and can be used for mixing the material with a hotplate magnetic stirrer and a PTFE coated magnetic stirring bar
The Special Clou – the Safe-Lab Principle
For safety reasons, our distillation apparatus is equipped with the Safe-Lab Principle. This system allows a tight and safe connection as well as an easy disconnection of the cone and socket. This can be realised by a combi-nut which is held on an external thread above the cone and holds and locks the socket. For disconnection this special nut has to be turned clockwise. The power of the fingers is enforced by the thread pitch, transferred axially to the socket. The ground joint is released.
