Page 25 - b.safe catalog

NEU
b.safe Control Waste Caps DLC Material: PTFE, PPS,PE I Temperature resistance: -50 °C to +80 °C I
Chemical resistance: ++ very good
Screw cap made of PPS, free movable insert made of PTFE with 2 per- manently fixed cables (length approx. 0,5 m each) for the connection
to a b.safe Mini-Display which signals a pre-alert when approx. 50% of the nominal volume are reached and a main alert for canister change as soon as 100% of the nominal volume are reached. With 1 additional red LED flashing light for easy identification of a full canister. With PFA fit- tings for capillary tubes with OD 1,6/2,2/3,2 mm (thread UNF 1/4“), hose connector for tubing ID 5,5-8 mm (thread NPT 1/8“), blind fittings for closing unused connections and 1 connector GL 14 for fixing the b.safe Exhaust Filter. Design and scope of delivery according
A
B
C
Cat. No.
b.safe FOR DISPOSAL 25
to table.
Canister thread
Number of capillary tubes
Number of fittings mm
Number of hose connections
for ID
Number of blind fittings
A
GL45
2
2x Ø 1,6 (green) 2x Ø 2,2 (purple) 2x Ø 3,2 (yellow)
1x Ø 5,5 - 8 mm
2x (milky-white, UNF 1/4“) 1x (white, NPT1/8“)
M 250-30
S55
4
4x Ø 1,6 (green) 4x Ø 2,2 (purple) 4x Ø 3,2 (yellow)
2x Ø 5,5 - 8 mm
4x (milky-white, UNF 1/4“) 2x (white, NPT1/8“)
M 255-30
C
S60
4
4x Ø 1,6 (green) 4x Ø 2,2 (purple) 4x Ø 3,2 (yellow)
3x Ø 5,5 - 8 mm
4x (milky-white, UNF 1/4“) 3x (white, NPT1/8“)
M 256-30
B
Application:
To avoid spill over of canisters through the connection of a b.safe Control Waste Cap
to a b.safe Mini-Display DLC Cat. No. R 659-03 for electronic level control. The additional pre-alert enables the user to provide exchange containers for big volumes of waste e.g. before the end of work or the weekend. Reliable monitoring of the filling levels of waste canisters in laboratory cupboards and workbenches. With the use of b.safe Waste Tubes, solvent waste is led directly into the canister, solvent vapours are held back by the exhaust filter with activated carbon.
-