Page 82 - b.safe catalog

50 b.safe COLLECTION OF WASTE
b.safe Waste Caps GL45
b.safe Waste Caps GL45 are especially adapted to the requirements on the collection of solvent waste in HPLC. The PTFE-insert is equipped with several threads (UNF 1/4“, NPT 1/8”) for a direct connection of different tubing diameters by means of Fittings or Hose Connectors. The HPLC waste can be led directly into a collection container with thread GL45.
The connector GL14 is reserved for the separately available Exhaust Filter. Its activated carbon filling adsorbs solvent vapours which are produced during filling so that no harmful vapours can escape from the collection container.
The PPS screw cap and the PTFE insert are extremely robust and resistant against thermal or chemical load. Furthermore, they can be sterilized by autoclaving up to 200 °C and also easily be cleaned in the dish washer.
The freely turnable PTFE insert allows a simple con-
PFA fittings for capillary tubing with various outer diameters
GL 14 thread for safe connection of the b.safe Exhaust Filter
No twisting of capillaries through 360 ° rotation of PTFE insert
Good grip for every hand size
tainer exchange without disarranging the installed capillary tubing and tubes. All tubes and tubing are firmly and tight fixed by Fittings with optimized inner cone and/or non-slip hose connectors.
A Viton® flat sealing provides tight closure of the collection container as it compensates possible pro- duction tolerances on the threaded neck. A special sealing lip made of PTFE isolates it from the vapour space. Combined with an Exhaust Filter, b.safe Waste Caps GL45 are the perfect protection for the disposal of solvent waste.
Hose connectors for tubing with
I. D. 5,5 – 8 mm
Blind fitting seals unused connector
Opportunity to mark and stick