Page 65 - b.safe catalog

b.safe Caps B83
Material: PTFE, PE | Temperature resistance: -50 °C to +80 °C | A
Chemical resistance: ++ very good
Screw cap made of PE for B83 thread, free movable insert made of PTFE. With PFA fittings for capillaries with O. D. 3,2 mm (thread UNF 1/4”), Blind Fittings made of PFA to close unused connections and an Air Valve with service life indicator. Version and scope of delivery as per below chart.
Number of capillary Number of Number of Blind Cat. No. connectors Fittings Fittings
mm
Application:
Perfectly matched system for removal of eluents. Tubing can be inserted down to
the ground of the bottle by means of the b.safe Fittings made of PFA. The conical seal cone clamps the tubing and seals the connection safely. The b.safe Air Valve is especially adapted to the flow rate in HPLC. The integrated non-return valve avoids evaporation of solvents and lets ambient air flow into the bottle in case of vacuum. The upstream porous PTFE membrane restrains pollutant particles and other conta- minations from outside. The 6 months service life of the filter can be easily monitored through either activating the display on the cap and exchanging the valve in case of completely red colouring or documentation of the exchange date by hand and clip in the display at the valve. PFA Fittings in other colours and for other tubing diameters can be found from page 43.
b.safeEXTRACTION 33
A
4
4 x Ø 3,2 (yellow)
3
M 183-04
b.safe Order directly
Air Valves Page 39
Economy pack for an exchange every 6 months.
b.safe INFORMATIVE Operating Principle Page 162
This is how pressure compensation is made during extraction.
Diameter 88 mm
Bottle thread
B83
Not sure if this cap fits?
Help for thread determination from page 168.
Pitch 12,5 mm