Page 57 - b.safe catalog

b.safe Distributors for Flushing Bottles Material: PP | Temperature resistance: 0 °C to +110 °C |
Chemical resistance: ++ very good
Screw cap made of PPS for GL45 thread / PP for GLS 80 thread, free movable insert made of PP with 4 lateral connectors (GL45) suitable for b.safe Caps GL 45 and 3 centric capillary connectors (UNF 1⁄4“). Version and scope of delivery as per below chart.
A
B
Suitable Number of for flushing
Number of capillary connectors
3
Number of Blind Fittings
3 (milky white)
Cat. No.
M 181-10
B GLS80
connectors
4x GL45
Application:
Flushing the HPLC installation without pollution or loss of solvents. The handling is very easy as the distributor is directly mounted on the flushing bottle. Remove the b.safe Caps from the eluent bottles and mount them on the connectors of the Distributor for Flushing Bottles. The passage at the distributor neck is sufficiently dimensioned so that the capillaries mounted on the cap can be inserted into the flushing bottle together with the filter. For the GL45 version of the Distributor for Flushing Bottles, we recommend to use smallest possible suction filters (max. O.D. 14 mm) to facilitate the insertion of tubing through the small bottle neck. If a connector of the distributor is not used, it can be closed with a screw cap GL45. Harmful solvent vapours cannot escape and the rinse solution is not polluted through ambient air by means of b.safe Caps with Air Valve. The Distributor for Flushing Bottles can also be used for back flushing the piston and/or the needle seat. Just connect the needed capillaries as well as an Air Valve with b.safe Fittings on the centric capillary connectors.
b.safe APPROPRIATE
Blind Fittings Page 44
For easy closure of unused connec- tors.
b.safe INFORMATIVE
Operating Principle Page 162
This is how pressure compensation is made during extraction.
Diameter 80 mm
Bottle thread
GLS80 (DIN168)
Not sure if this cap fits?
Help for thread determination from page 168.
b.safeEXTRACTION 25
A
GL45
4x GL45
3
3 (milky white)
M 181-03
Pitch
15 mm