Page 165 - b.safe catalog

A
ABCD
page 131). Version and scope of delivery as per below chart.
b.safe FILL LEVEL CONTROL 133
b.safe Waste Caps S60 with electronic Level Indicator Material: PTFE, PP | Temperature resistance: 0°C to +80 °C |
Chemical resistance: ++ very good
Screw cap made of PP for S60 canister thread, free movable insert made of PTFE with permanently fixed cable (length 400 mm) to connect an electronic Level Indicator (b.safe Display) as well as sight glass and visual pin for additional optic control of the filling level. With PFA Fittings for capillaries with O. D. 1,6 / 2,2 / 3,2 mm
(UNF 1/4” thread), Blind Fittings to close unused connections, 1 hose connector for tube
I. D. 5,5 - 8 mm (NPT 1/8” thread) and 1 connector to screw in a b.safe Exhaust Filter
(GL14 thread, not included in the scope of delivery). An optional grounding connection
can be used to derive static charge by means of a grounding cable (Cat. No. R 604-01 on
Number of Number of capillary Fittings connectors mm
Number of Blind Fittings
1 (milky white)
1 (milky white)
Hose Ground- Connectors ing con- nection
1x - Ø 5,5 - 8 mm
1x • Ø 5,5 - 8 mm
Cat. No.
M 206-42
M 206-61
A
3
3 x Ø 1,6 (green) 3 x Ø 2,2 (purple) 3 x Ø 3,2 (yellow)
2 (milky white)
0
-
M 206-41
B 2
D 2
2 x Ø 1,6 (green) 2 x Ø 2,2 (purple) 2 x Ø 3,2 (yellow)
2 x Ø 1,6 (green) 2 x Ø 2,2 (purple) 2 x Ø 3,2 (yellow)
C
3
3 x Ø 1,6 (green) 3 x Ø 2,2 (purple) 3 x Ø 3,2 (yellow)
2 (milky white)
0
•
M 206-60
Application:
To avoid spill over of canisters through the connection of a Waste Cap to a b.safe Display for electronic level control. The filling levels of waste containers in laboratory cupboards and workbenches can be reliably monitored. Additionally, you can use all benefits of b.safe Caps such as the connection of capillaries through b.safe Fittings and tubing with the appropriate hose connectors. Solvent vapours from the escaping air during filling are restrained from the Exhaust Filter with active carbon filling. PFA Fittings in other colours and hose connectors for many other inner diameters can be found from page 97.