Page 132 - b.safe catalog

100 b.safe COLLECTION OF WASTE
b.safe Corrugated Tubing
Coupling
b.safe products provide solutions for many demands, also for tight and leak-free connections of corrugated tubing as supplied e.g. with HPLC devices of the manu- facturers Agilent or Thermo Scientific. It is not possible to get a tight connection on waste caps if you use standard hose connectors with these hard-walled, inflexible tubes.
You cope perfectly with this challenge by using b.safe Corrugated Tubing Coup- lings. With this special screw joint you get a tight connection between corrugated tubing and the hose connection (thread NPT 1/8”) on b.safe Waste Caps.
1
2
2 3
3 4
Assembly instructions:
Screw the b.safe Corrugated Tubing Coupling into the hose connection (thread NPT 1/8”) of your Waste Cap.
Push the locking nut and the clamp ring on the tube end.
Put the tubing on the tapered end of the coupling and push the tubing to the stop.
Push also the clamp ring and the locking nut to the stop. Secure the connection by screwing the locking nut onto the coupling.
Put a fork wrench (wrench size 10 mm) on the recessed grips on the coupling. Use the fork wrench to prevent the coupling from turning while the locking nut is tightened firmly for a leak-free connection.
4 5 1
5