Page 328 - BOLA Catalogue

BOLA Gas Distributors
FILTRATION
Material: Temperature resistance: Chemical resistance:
PTFE from -200°C to +250°C +++ universal
Product description:
With finest bores (4 x 0,4 mm) for steady sparkling of the flowing gas, only low pressure is necessary. Suitable for scrubber bottles and columns (page 326) with M 8x1 thread and for gas inlet tubes (page 329).
O.D.
mm
Height
ca. mm
Receiver
M
Suitable for
Cat. No.:
Cat. No.:
28
24
8x 1
A 117-../ A 118-..
N 1501-16
BOLA Scrubber Columns
Material: Temperature resistance: Chemical resistance: Pressure: Transparency:
FEP, PTFE from -200°C to +205°C +++ universal no pressure transparent
Product description:
Tall, slim scrubber column made of FEP. Inlet and outlet tube as well as riser tube are made of FEP (5,6 x 8 mm), bottom and top are made of pure PTFE. The standard PTFE frit has a pore size of approx. 3 μm and is screwed on the riser tube with an M8x1 thread. It can be exchanged with the PTFE gas distributor with fine bores (Cat. No. N 1501-16 – page 327) which needs a lower primary pressure.
Product advantages:
» transparent
» unbreakable
» intense mixing of gas due to tall riser tube » frit easily exchangeable
Flow rate:
Using the standard gas distributor and at the stated system pressure.
#SUITABLE PAGE 328
Capacity
ml
Total height
mm
Connection for tubing O.D. mm
O.D. of column
mm
Cat. No.:
500
400
2x 8
54
A 117-04
1.000
700
2x 8
54
A 117-08
Cat. No.:
0,1 bar
System pressure
0,3 bar
0,6 bar
A 117-04
15,0 l/h
62,5 l/h
130,0 l/h
A 117-08
5,0 l/h
50,0 l/h
117,5 l/h
Scrubber Adaptors for Bottles forGL45andGLS80
By the way: BOLA offers custom manufacture. From 1 piece. Hotline +49 (0) 93 46-92 86-0
327