Page 295 - BOLA Catalogue

SCREW JOINTS FOR HPLC
BOLA HPLC-Distributors for Bottles – what you should know about.
They consist of a screw cap made of glass-fibre reinforced PP with
GL 45 thread and a movable body with connection ports. All necessary screw joints and gaskets for connecting hard-walled tubing (e.g. PTFE, FEP or PFA, see page 189) up to a maximum diameter of 6
mm are included in delivery and make the HPLC distributors usable immediately. Tubing up to a diameter of 4 mm can be passed and fixed absolutely tightly at the requested immersion depth. The distributors with stopcocks allow closing unused ports; the FEP stopcock plug provides a universal chemical resistance.
+No disarrangements thanks to 360° clearance of distributor body
+For tubing with
O.D. 1,6 – 4 mm or 6 mm
+Also available with integrated stopcocks made of FEP
Because of the stopcocks, it is not possible to pass the tubing. A connection to the bottom of the bottle can still be made by pushing tubing with O.D. of 5 mm or I.D. of 6 mm in or on the port on the lower side of the distributor.A possible unevenness of the bottle
neck is adjusted by an o-ring behind an elastic sealing lip, and the bottle is closed tightly. The product is only exposed to the body of the distributor.
The special feature: the body of the distributor can be turned independently from the screw cap. This means that the completely assembled distributor can be removed and fixed on another bottle without the risk of disarranging the tubing.
+
+
Integrated seal ensures perfect sealing
+Ready for immediate
use, accessories such as sealing rings and silicone sealing plugs included in the scope of delivery
294
www.bola.de
Handy cap geometry ensures good grip