Page 186 - BOLA Catalogue

BOLA Tubing
BOLA Tubing offers many advantages:
» Short minimum lengths
Depending on the tubing dimensions – for details please look at our price-list. Minimum lengths are unfortunately necessary for granting a low price per metre.
» No specification of fixed rolls – available per metre
Free choice of requested length between minimum length and maximum production length.
» Longer lengths in one piece possible
For tubing up to O.D. 10 mm, quantities of up to 100 metres in one length are possible without extra charge; quantities of more than 100 metres in one length are only available in particular cases – please ask us.
» Wheneverpossible,yourorderedquantityis
supplied in one length
If our inventory or the ordered quantity does not allow another possibility, the tubing is supplied in partial lengths without consultation. Example: 90 m = 60 m + 30 m
» Goodtohandle
Tubing up to an O.D. of 3 mm and with a minimum length of 30 m is supplied on reels. This prevents bends and twists and makes storage and rolling up easier.
» Tailoredrolls/reelsareavailable
Several rolls with the same lengths are available at low extra charges, e.g. 5 rolls of 40 metres or 11 rolls of 22 metres.
» Excellentqualityatfairprices
Stricter tolerances than the general industrial standard GKV – perfect interaction with our BOLA Fittings and BOLA Stopcocks.
Tolerances of BOLA Tubing – You can count on them.
BOLA Tubing is perfectly suitable for the use with all BOLA Screw Joint Systems. You can be sure that all fittings and screw joints fit together with the tubing. The production of tubing always involves certain tolerances in outer diameter and wall thickness.
We always check our tubing repeatedly on the basis of strict BOLA-internal standards. These standards are stricter than the standards which are currently in the market.
Nominal O.D.
from 0,4 mm to 3,2 mm
» tolerance of O.D. +/- 0,05 mm
over 3,3 mm to 10,0 mm
» tolerance of O.D. +/- 0,10 mm
over 10,1 mm to 16,0 mm
» tolerance of O.D. +/- 0,15 mm
over 16,1 mm to 22,0 mm
» tolerance of O.D. +/- 0,20 mm
over 22,1 mm
» tolerance of O.D. +/- 0,25 mm
HELPFUL: page 358 Detailed information about tubing tolerances
TUBING, FILMS, TILES
By the way: BOLA offers custom manufacture. From 1 piece. Hotline +49 (0) 93 46-92 86-0 185