Page 172 - BOLA Catalogue
P. 172

  BOLA FEP Tubing
    Material: Temperature resistance: Chemical resistance: Transparency:
FEP from -200°C to +205°C +++ universal transparent
 Product description: Transparent, gastight tubing
Product advantages:
» non-porous
» almost universal chemical resistance » free from extractable agents
» physiologically safe
» non-adhesive surface
» very good sliding characteristics
» very good dielectric characteristics » flame retardant according to UL94V0 » oxygen value more than 95
» resistant to irradiation and weather » can be sterilized in autoclaves
     I.D.
mm
    (1/32“) 0,8
(1/16“) 1,6
 (1/16“) 1,6
2,0
  4,0
Applications:
» Perfect tubing for aggressive and pure liquids or gases
O.D.
mm
6,0
Wall thickness
mm
Bending radius1 mm
13
7
36
Burst pressure2 bar
Cat. No.:
S 1815-04
BOLA Practical Tip Uwe Hossfeld » application engineering
    0,40
112
      1,5
3,0
0,75
12
112
S 1815-05
     (1/8“) 3,2
0,80
112
S 1815-08
      3,0
0,50
18
56
S 1815-07
      2,0
4,0
1,00
16
112
S 1815-12
      (1/8“) 3,175
(1/4“) 6,35
1,58
26
112
S 1815-14
      (5/32“) 3,96
3,6
6,0
1,20
30
75
S 1815-16
      (1/4“) 6,35
1,20
34
67
S 1815-24
    1,00
56
S 1815-20
      (11/64“) 4,35
(3/16“) 4,78
(1/4“) 6,35
(1/4“) 6,35
1,00
52
51
S 1815-28
      0,79
51
37
S 1815-30
      5,6
6,0
8,0
8,0
1,20
53
 64
48
S 1815-32
     1,00
37
S 1815-36
      (1/4“) 6,35
(3/8“) 9,52
1,59
58
56
S 1815-40
      6,8
10,0
1,60
63
53
S 1815-44
      8,0
10,0
1,00
100
28
S 1815-48
      (3/8“) 9,52
12,0
(1/2“) 12,7
14,0
1,59
101
37
S 1815-56
      10,0
12,0
1,00
144
196
22
    19
S 1815-60
  1,00
S 1815-68
How can you calculate the maximum bending radius?
Very easy: Squared outer diameter of tubing divided by wall thickness.
        PTFE and PFA Tubing
» All BOLA Tubing have small tolerance
on the outer diameter and the wall thickness. This assures that fittings and screw joints always match. «
Inge Fenstad » Chiron AS
1 Bending radius: minimum bending radius in mm at a room temperature of 23°C
 2 Burst pressure: computed value in bar at a room temperature of 23°C. It is recommended to restrict the maximum working pressure to 25% of the burst pressure. For higher temperatures, this value has to be multiplied by the reduction factor shown on page 284. It is the user’s responsibility to check if the used tubing fulfils the respective requirements.
www.bola.de
 160
 TUBING » FILMS » TILES
   170   171   172   173   174