Page 154 - BOLA Catalogue

COMPONENTS FOR EX-PROTECTION
BOLA Flexible Tubing EX
Material: Temperature resistance: Chemical resistance: Conductivity:
PFA-EX from -200°C to +260°C +++ universal 106 Ohm
Product description:
Static dissipative, corrugated tubing with nominal width 10 and with circular corrugations around the longitudinal axis. Cylindrical tubing ends with a length of 40 mm can for example be connected directly to fittings, stopcocks or hose connectors. Together with BOLA Labora- tory Screw Joints EX, the connection is static dissipative, absolutely tight and suitable for vacuum.
Product advantages:
» flexible to highly flexible
» tight bending radius only causes little cross-section reduction » non-porous
Applications:
» antistatic applications
» in explosive ambiance (explosion protection) » for easy handling of liquids and gases
» for transport of solvents or alcohols
» ideal for connections under vibrations
» usable with a small bending radius
» for compensation of thermal expansions
#SUITABLE PAGE 146
Tubing end
I.D. O.D.
Bending radius1 mm
Burst pressure2 bar
Cat.No.:
Length 0,5 m
Cat.No.:
Length 1,0 m
Cat.No.:
Length 2,5 m
4
6
18
11
S 1824-24
S 1824-54
S 1824-74
6
8
18
11
S 1824-27
S 1824-57
S 1824-77
8
10
18
11
S 1824-30
S 1824-60
S 1824-80
10
12
18
11
S 1824-33
S 1824-63
S 1824-83
12
14
18
11
S 1824-35
S 1824-65
S 1824-85
Conductive fittings and stopcocks made of PTFE-EX
BOLA PRACTICAL TIP
Easy tubing assembly
Before assembling the tubing on a hose connector, heat it in an oven or with a hot air gun to approx. 60°C. All BOLA products can be heated for easier assembly or disassembly.
154
www.bola.de
1 Bending radius: minimum bending radius in mm at a room temperature of 23°C
2 Burst pressure: computed value in bar at a room temperature of 23°C. It is recommended to restrict the maximum working pressure to 25% of the burst pressure. For higher temperatures, this value has to be multiplied by the reduction factor shown on page 359. It is the user’s responsibility to check if the used tubing fulfils the respective requirements.