BOLA HPLC Distributors for Bottles
They consist of a screw cap made of glass-fibre reinforced PP with GL 45 thread and a movable body with connection ports. All necessary screw joints and gaskets for connecting hard-walled tubing (e.g. PTFE, FEP or PFA) up to a maximum diameter of 6 mm are included in delivery and make the HPLC distributors usable immediately.
Tubing up to a diameter of 4 mm can be passed and fixed absolutely tightly at the requested immersion depth.
The distributors with stopcocks allow closing unused ports; the FEP stopcock plug provides a universal chemical resistance.
Because of the stopcocks, it is not possible to pass the tubing. A connection to the bottom of the bottle can still be made by pushing tubing with O.D. of 5 mm or I.D. of 6 mm in or on the port on the lower side of the distributor.
A possible unevenness of the bottle neck is adjusted by an o-ring behind an elastic sealing lip, and the bottle is closed tightly. The product is only exposed to the body of the distributor.
The special feature: the body of the distributor can be turned independently from the screw cap. This means, that the completely assembled distributor can be removed and fixed on another bottle without the risk of disarranging the tubing.
BOLA catalogue
Order your free catalogue!
Know what's on
Subscribe for the BOLA newsletter now and receive regular information about the lab.
Made to Measure
You need a desiccator which is not in our standard product range? No problem – simply send a sketch.