Basket: Empty
Technical information
Flaning of tubings
How to flange PTFEGlossaryPTFEPolytetrafluoroethylene tubing
- cut tubing square» clamp tubing by means of tubing holder – overhang approx. 3-5 mm
- press tubing on flangingGlossaryflanging FlangingGlossaryFlanging Flanging is originally a procedure of forming and connecting metals. In the lab, it is used for example with screw joints. All kinds of BOLA PTFE, FEP and PFA tubing can be flanged. We are offering both flanged tubing and customisations. is originally a procedure of forming and connecting metals. In the lab, it is used for example with screw joints. All kinds of BOLA PTFEGlossaryPTFEPolytetrafluoroethylene , FEPGlossaryFEPTetraflouroethylene-Perflouropropylene and PFAGlossaryPFA Perfluoroalkoxy tubing can be flanged. We are offering both flanged tubing and customisations. tip and preform it
- press preformed tubing end on cooling plate
- push fitting and washer on the tubing and tighten the fitting
- ready
Of course we also have flanged tubing with assembled tube end fittings in different lengths in our standard range (see page 182).
We can also manufacture tubing according to your requirements.
Don’t confuse UNF ¼” 28 and M6 threads!
Besides the common UNF threads, there are also M6 threads circulating. These threads are very similar to the UNF thread, but please only use UNF tube end fittings to avoid damage or leakage of your fittings.
