Basket: Empty

All BOLA novelties at a glance.

BOLA Bottles Distillation Apparatus
Cat.-No. B 328-...
Transparent, non-porous bottles, pressure compensation by means of 2,5µm PTFE filtering membrane. Possibility to connect temperature probes or tubing.

BOLA Double-Moon-Shaped Stirrer Shafts
Cat.-No. C 374-...
PTFE-jacketed stainless steel shaft, two each tilting half-moon stirrer blades with double-sided groove and access for the stirrer shaft completely made of PTFE. Universal chemical resistance since the product is only exposed to PTFE.

BOLA Globe Stirrer Couplings Bestseller:
This product is very popular with our clients.
Cat.-No. C 398-...
Made of POM, a plastic material with a good mechanical strength, powerful transmission of up to 300 Ncm, suitable for a speed of up to 1.200 rounds per minute, maximum misalignment of axes 10 mm.

BOLA Moon-Shaped Blades
Cat.-No. C 442-...
These solid stirrer blades are made of PTFE and have a set of clamp screws made of a PTFE/PEEK compound. The blades can be fixed tightly on BOLA Stirrer Shafts by means of the clamp screws. A spanner wrench is included for easy assembly.

BOLA Magnetic Stirrer Heads (P-MRK) Bestseller:
This product is very popular with our clients.
Cat.-No. C 520-...
Ideal stirrer head for PTFE-jacketed stirrer shafts from BOLA. Consisting of capsuled drive shaft (stainless steel) with ball bearings, rotor and lower bearing made of PTFE/PEEK and a hollow shaft made of borosilicate glass. Requires little space due to compact construction.No leakage or memory effects due to non-porous, welded rotor. Compression fittings for safe fixing of stirrer shaft and optimum power transmission. Joint-Cone with nut (Safe-Lab) for easy locking and unlocking of the ground joint. Square size 6 mm for accepting an agitator or a stirrer coupling.

BOLA Swivelling Screw Fittings with Ground Joint Bestseller:
This product is very popular with our clients.
Cat.-No. D 692-...
Ground joint body made of PTFE, screw cap made of PPS. Probes, tubes or tubing are firstly inserted through the fitting, then the fitting is put into the ground joint and the inserted element can be fixed in the requested position.

BOLA Laboratory Screw Joints EX
Cat.-No. D 840-...
Screw cap made of conductive black PPS-EX reinforced with glass fibres, inner parts made of conductive PTFE-EX.

BOLA GL Tube Fittings T EX
Cat.-No. D 857-...
Tube fittingT-shaped made of PTFE-EX, three connections with GL thread. Connection of tubing or tube with BOLA Laboratory Screw Joints EX.

BOLA GL Tube Fitting Elbow EX
Cat.-No. D 858-...
Tube fitting elbow-shaped made of PTFE-EX, two connections with GL thread. Connection of tubing or tube with BOLA Laboratory Screw Joints EX.

BOLA Ground Joint-GL 2-Way Stopcocks
Cat.-No. E 689-...
Ground joint 2-way-stopcock with straight bore and one connection with GL thread or ground joint 3-way-stopcock with T-shaped bore and two connections with GL thread. Cylindrical stopcock plug for good tightness, stop valve with mark of flow direction. Suitable for pressures up to max. 6 bar, or for vacuum. Universal chemical resistance, the flowing product is only exposed to PTFE.

BOLA Antistatic Explosion-Proof Tubing Bestseller:
This product is very popular with our clients.
Cat.-No. S 1827-...
Very good electric conductivity due to a special “antistatic compound” made of pure PTFE and finest, highly pure carbon dust (less than 2,5%). Colour: black

BOLA Zebra Explosion-Proof Tubing Bestseller:
This product is very popular with our clients.
Cat.-No. S 1855-...
Transparent PFA tubing with black longitudinal conductive stripes on the outer surface. The tubing is absolutely round and can be connected to all common fittings.